<progress id="5d6tc"></progress><dl id="5d6tc"></dl>

<em id="5d6tc"></em>
<em id="5d6tc"><tr id="5d6tc"></tr></em>

      <div id="5d6tc"></div>

        <div id="5d6tc"><ol id="5d6tc"><mark id="5d6tc"></mark></ol></div>
          <div id="5d6tc"></div>

            上海航欧机电设备有限公司 > 产品分类 > 传动与控制 > Placid Industries

            Placid Industries

            Placid Industries工厂授权上海航欧机电设备有限公司中国区代理(Non-exclusive)

            http://www.placidindustries.com/sales.html

             

            Placid Industries工厂授权上海航欧机电设备有限公司中国区代理

            Placid Industries工厂授权上海航欧机电设备有限公司中国区代理

             

            PLACID传动控制器 ?#27431;?#21046;动器/离合器:PLACID普莱西德工业公司1973年-成立 , 1981年-制造?#27431;?#31163;合器和制动器,1990年在欧洲销售通过HucoD ,1994年-制造磁滞制动器,2003年销售大?#27431;?#21046;动器(千字节)和离合器(架 KC)

             

            PLACID产品特征:由于没有电激励,自由的轴旋转。 随着电子激发,成为轴耦?#31995;?#24773;况。 虽然负载转矩小于输出扭矩,轴不会旋转。 ?#22791;?#36733;转矩的增加,制动将下滑顺着水平的转矩所规定的线圈输入电流。

             

            PLACID公司主要产品:传动控制器,PLACID?#27431;?#31163;合器PLACID传动控制器,PLACID?#27431;?#21046;动器, PLACID?#27431;?#31163;合器, PLACID磁滞制动器, PLACID储存自订离合器和制动器, PLACID

            主要型号:

            ?B5ZD 0.003 – 0.063 1.5 11 x 10-9 1.5 0.7 4000 0.2 B5ZD data sheet
            ?B5Z 0.006 – 0.31 16 x 10-8 2 3500 B5Z data sheet
            ?B1 0.04 – 1 2 11 x 10-7 3.5 4 3000 0.6 B1 data sheet
            ?B2 0.05 – 2.5 3 55 x 10-7 8 5 2500 1 B2 data sheet
            ?B6 0.2 – 6 4 23 x 10-6 15 25 2000 2 B6 data sheet
            ?B15 0.3 – 15 6 34 x 10-6 20 2.5 B15 data sheet
            ?B35 0.6 – 35 9 12 x 10-5 30 50 1800 4 B35 data sheet
            ?B60 1 – 60 8 45 x 10-5 50 100 7 B60 data sheet
            ?B115 2.5 – 115 13 61 x 10-5 55 120 8 B115 data sheet
            ?B150 3 – 150 15 x 10-4 80 1300 12 B150 data sheet
            ?B220 4 – 220 18 29 x 10-4 110 1000 21 B220 data sheet
            B5Z
            B5ZD
            Options ????DXF
            B1 Options ????DXF
            B2 ????DXF ????DXF
            B6 ????DXF ????DXF
            B15 ????DXF ????DXF ????DXF
            B35 ????DXF ??????DXF ????DXF
            B60 Options ????DXF
            B115 ????DXF ????DXF
            B150 ????DXF ????DXF
            B220 ??????DXF ????DXF
            MODEL

            (Click p/n
            to view
            photo)

            Shaft
            Style
            ?Torque
            Range

            (lb.-ft.)

            ?24v
            Coil
            Maximum
            Overhung
            Load

            (lbs.)

            Max.
            RPM
            Weight

            (lbs.)

            Data Sheets

            ?

            ?Drawings

            ??Optional
            Electric
            Fan
            Cooling
            Input
            Current

            (amps)
            ?KB-2.5 Solid 0.2 – 15 1.3 90 1800 19 KB-2.5
            data sheet
            DXF
            ?KB-5 0.5 – 38 2 125 31 KB-5
            data sheet
            DXF
            ?POB-100F 0.5 – 70 2.4 175 79 POB-100F
            data sheet
            DXF POB-100F
            with fan
            ?POB-200F 2 – 130 2.7 200 128 POB-200F
            data sheet
            DXF POB-200F
            with fan
            ?POB-400F? 4 – 300 3.5 325 225 POB-400F
            data sheet
            DXF POB-400F
            with fan
            ?PLB-50 Hollow 1.4 – 30 1.25 125 500 17 PLB-50
            data sheet
            DXF
            ?PLB-100 1.5 – 70 2 175 31 PLB-100
            data sheet
            DXF
            ?PLB-200 4 – 140 2.4 200 62 PLB-200
            data sheet
            DXF
            MODEL Heat Dissipation??(Watts) Compressed Air
            at
            100 RPM?
            ?*?at
            1000 RPM?
            with external cooling by: ?Pressure?
            (lb.-in.2)
            Flow Rate
            (ft.3?/ minute)
            ?Compressed
            Air?
            Optional
            Electric Fan?
            ?KB-2.5 130 175 260 4 6
            ?KB-5 190 275 425 5 7
            ?POB-100F? 300 500 800 9 10
            ?POB-200F? 425 800 1200 7 6
            ?POB-400F? 550 1200 1900 21 14
            ?PLB-50 160, all RPM 240 7 7
            ?PLB-100 200, all RPM 300 8
            ?PLB-200 350, all RPM 500 9
            MODEL

            Click p/n
            to view
            photo

            Torque
            Range

            (lb.-in.)

            Input
            Electric
            Power

            (Watts)
            Slip Heat
            Dissipation

            (Watts)

            Maximum
            Overhung
            Load?

            (lbs.)

            Max.
            RPM
            ?Weight

            (lbs.)

            Data Sheets

            ?

            Drawings
            ?C2D ?0.01 – 0.31 3 2 4 2000 0.7 C2D data sheet ?PDF ?DXF
            ?C2 0.06 – 2 6 C2 data sheet
            ?C5 0.19 – 5 5 10 20 3 C5 data sheet PDF DXF
            ?CC14-H?? 0.4 – 14 5 20 35 1400 3.5 ?CC14 data sheet ?PDF DXF
            ?C15 0.4 – 15 6 5 C15 data sheet PDF DXF
            ?C35 1 – 35 10 30 50 1000 9 C35 data sheet PDF DXF
            ?C70 1.3 – 70 14 50 80 17 C70 data sheet PDF DXF
            ?C130 4 – 130 15 80 22 ?C130 data sheet ?PDF DXF
            MODEL

            (Click p/n
            to view
            photo)

            Shaft
            Style
            ?Torque
            Range

            (lb.-ft.)

            ?24v
            Coil
            ?Max.
            Over-
            hung
            Load

            (lbs.)

            Max.
            RPM
            Weight

            (lbs.)

            Data Sheets

            ?

            ??Drawings

            Input
            Current

            (amps)
            ?KC-2.5 solid 0.2 – 15 1.3 90 ?1800 21 KC-2.5
            data sheet
            DXF
            ?KC-5 0.5 – 38 2 125 35 KC-5
            data sheet
            DXF
            ?POC-100F 0.5 – 70 2.4 175 87 POC-100F
            data sheet
            DXF
            ?POC-200F 2 – 130 2.7 200 147 POC-200F
            data sheet
            DXF
            ?POC-400F 4 – 300 3.5 325 259 POC-400F
            data sheet
            DXF
            ?PHC-50 hollow 1 – 30 1.3 125 1000 26 PHC-50
            data sheet
            DXF
            ?PHC-100? 1 – 65 2.2 175 46 PHC-100
            data sheet
            DXF
            MODEL Heat Dissipation
            (watts)
            Compressed Air
            at
            100 RPM
            at
            1000 RPM
            with compressed
            air cooling
            Pressure
            (lb.-in.2)
            Flow Rate
            (ft.3?/ minute)
            KC-2.5 130 175 260 4 6
            KC-5 190 275 425 5 7
            POC-100F 300 500 800 9 5
            POC-200F 425 800 1200 7 6
            POC-400F 550 1200 1900 21 14
            PHC-50 250 400
            PHC-100 400 800
            Machine:?Wire EDM (Electric Discharge Machining) machine
            Manufacturer:?Vollmer

            • Placid part number:?B7-24-1ME
            • OEM part number: unknown
            • Coil: 24 volts, Resistance: 134 ohms
            • Case O.D. = 2.00 “, 51 mm

            Application?– Control tension in wire that cuts metal.

             

            Machine:?Wire EDM (Electric Discharge Machining) machine
            Manufacturer:?Charmilles

            • Placid part number:?B10-18
            • OEM part number: 434234.
              Replaces 433833 with no modifications.
            • For machines: FI290, FI300, FI500
            • Coil: 18 volts, Resistance: 38 ohms
            • Case O.D. = 2.36 “, 60 mm

            Application?– Control tension in wire that cuts metal.

             

            Machine:?Photographic film developer
            Manufacturer:?Kodak

            • Placid part number:?B35-EK
            • Replaces: Qualex 2B4473,??Electroid 50-EPB30-11-08S-24
            • Coil: 24 volts, Resistance: 50 ohms
            • Case O.D. = 3.375″

            Application?– Tensions roll of film

             

            Machine:?Microfiche (microfilm) duplicator
            Manufacturer:?Photomatrix (product line now owned by Scan-Optics)
            Was sold as a Kodak machine.

            • Placid part number:?B35-12-PH
            • OEM part number: Photomatrix 102363
            • Coil: 12 volts, Resistance: 18 ohms
            • Case O.D. = 3.375″

            Application?– Tensions roll of film

             

            Machine:?Digital Printing Press, Quickmaster Di
            Manufacturer:?Heidelberg

            • Placid part number:?B60-HEID
            • OEM part number:?A4.114.1420
            • Coil: 12 volts, Resistance: 18 ohms
            • Case O.D. = 4.5 “

            Application?– Tensions plate material.

             

            Machine:?Textile processing machine
            Manufacturer:?Young Engineering

            • Placid part number:?B60-YE-1
            • OEM part number: 26010101
            • Coil: 90 volts, Resistance: 547 ohms
            • Case O.D. = 4.5 “
            • 2 brakes per machine

            Application?– Provides drag torque on 1/2 of a roller to maintain web straightness.

             

            Machine:?Pipe bending machine
            Manufacturer:?Eaton Leonard

            • Placid part number: B115-EL
            • OEM part number:?800469 H, Carriage Brake
            • Coil: 24 volts, Resistance: 36 ohms
            • Case O.D. = 4.5 “
            • 2 to 4 brakes per machine

            Application?– Holds chain connected to carriage & verticle axis stationary while pipe is being bent.

             

            Machine:?Beverage container labeling machine
            Manufacturer:?Trine

            • Placid part number:?B150-CMS
            • OEM part number: 4516
            • OEM machine: 4500
            • Coil: 24 volts, Resistance: 55 ohms
            • Case O.D. = 5.2 “

            Application?– Tensions roll of labels, to be put on soda bottles, etc.

            Machine:?Bagger
            Manufacturer:?Rennco

            • Placid part number:?C25-24-W2
            • OEM part number: Unknown
            • Coil: 24 volts, Resistance: 43 ohms
            • Case O.D. = 2-7/8 “
            • Must be mounted with shafts horizontal.

            Application?– Winds edge of plastic web. Powered by?Placid Industries power supply PS-24-M

             

            Machine:?Digital Printing Press
            Manufacturer:?Ryobi
            Also sold under Xerox name.

            • Placid part number:?C100-PRST1
            • Ryobi part number: 95325004
            • Presstek part numbers: 535454528,
              535454528-1, 535454528-2, 535454528-3
            • Replaces Ogura clutch, part number: OPC 100-01
            • OEM machines: Ryobi 3404-DI??&
              Xerox Docu-Color 233-DI
            • Coil: 12 volts, Resistance: 11 ohms
            • Case O.D. = 4.5 “

            Application?– Feeding plate material in digital printing press.

             

            Machine:?Rewinder
            Manufacturer:?CTC International, (formerly Compensating Tension Control)

            • Placid part number:?C130-90-CTC
            • OEM part number: B31159
            • Coil: 90 volts, Resistance: 633 ohms
            • Case O.D. = 5.20 “

            Application?– Controls tension on roll. Hollow through-shaft for compressed air, to actuate chuck.

             

            Machine:?Digital Printing Press
            Manufacturer:?Adast (Adamovske Strojirny)

            • Placid part number:?C100-ADAST
            • OEM machine: Adast 557
            • Coil: 12 volts, Resistance: 11 ohms
            • Case O.D. = 4.5 “

            Application?– Feeding plate material in digital printing press.

            Machine:?35mm Photographic Film Splicer
            Manufacturer:?Gretag

            • Placid part number:?15CC2-24-1F
            • OEM part number: 50-350706-001
            • Coil: 24 volts, Resistance: 205 ohms
            • Case O.D. = 1.437 “

            Application?– Apply torque to 35mm film bobbin, to determine the direction the film is wound inside the can.

             

            Machine:?Daytona USA car racing game
            Manufacturer:?Sega

            • Placid part number:?C-Daytona
            • Part number: Sega 601-7489
            • Coil: 24 volts, Resistance: 31.3 ohms
            • Case O.D. = 3-5/8 “

            Application?– Connects to the steering wheel.

             

            Machine:?Docu-Mate II, Microfilm Machine
            Manufacturer:?Terminal Data Corp. (TDC)

            • Placid part number:?CC30P-10-1
            • OEM part number: 212023
            • Coil: 10 volts, Resistance: 5 ohms
            • Case O.D. = 3-3/4 “
            • 2 clutches per machine
            • 1 brake per machine, Placid Ind. p/n B25P-10-1, TDC p/n 212022, not shown

            Application?– Engages motor to belt that transports original paper document.

             

            Machine:?Turret-style rewinder
            Manufacturer:?CTC International, (formerly Compensating Tension Control)

            • Placid part number:?CC60P-CTC
            • OEM part number: P1068-19
            • Coil: 90 volts, Resistance: 540 ohms
            • Case O.D. = 3.50 “
            • 5 clutches per machine
            • Special low torque version, CC60-CTC-B, for small rolls & light tension, also available.

            Application?– Machine winds web onto smaller rolls. The clutch drives the small roll, controlling tension.

            Left: Clutch CC60-CTC-B
            Special low torque, high RPM version
            Rated torque = 30 lb.-in.

            Right: Clutch CC60P-90-CTC
            Standard version
            Rated torque = 60 lb.-in.

            Left:

            • Placid name:?Rotor
            • Placid part number:?R15P-2
            • Accraply part number: 060502
            • Replaces Ogura OPC-15
            • Case O.D. = 1-5/8 “
            Right:

            • Placid name:?Stator
            • Placid part number:?S15-10
            • Accraply part number: 09741
            • Replaces Ogura OPC-15-01
            • Coil Resistance: 8.4 ohms
            • Case O.D. = 4 “

             

            Rotor & Stator?(shown assembled)
            Rotor:

            • Placid part number:?R30
            • Torque = 30 lb.-inches
            • Case O.D. = 2.149″

            Stator:

            • Placid part number:?S30
            • Voltage: 6, 12, 24 or 90 D.C.
            • Case O.D. = 4″
            MODEL

            (Click p/n
            to view
            photo)

            Torque
            Range

            (oz.-in.)

            Input
            Electric
            Power

            (watts)
            Shaft Inertia

            (lb.-in.-sec.2)

            Slip Heat
            Dissipation

            (watts)
            Overhung
            Load, Max.

            (lbs.)

            Max.
            RPM
            Weight

            (lbs.)

            Data Sheets
            ?
            Cover On Cover Off
            ??H3?? ?0.04 – 2.5 2.5 ?3.8 x 10-6 5 1 10,000 0.23 H3 data sheet
            ??H11?? 0.3 – 11 2 ?36 x 10-6 9 15 4 9000 0.7 H11 data sheet
            ??H35?? 0.6 – 35 6 ?92 x 10-6 15 25 5 8000 2 ??H35 data sheet
            ??H85?? ??3 – 85 5 ?560 x 10-6 35 60 40 6000 4.5 ??H85 data sheet
            ??H140?? ??4 – 140 7 ?970 x 10-6 45 75 40 5000 6 ??H140 data sheet
            ??H250?? ??6 – 250 7 ?290 x 10-5 65 110 50 5000 9 H250 data sheet
            MODEL ??DRAWINGS
                 
            ?H3 ???DXF ???DXF ???DXF
            ?H11 ???DXF ???DXF ???DXF
            ?H35 ???DXF ???DXF ???DXF
            ?H85 ???DXF ???DXF ???DXF
            ?H140 ???DXF ???DXF ???DXF
            ?H250 ???DXF ???DXF ???DXF
            PS   24 Volt,?0.75 Amp??&??12 Volt,?1.25 Amp versions
            For all our small brakes & clutches

             

            • Easy to use?– The Span adjustment scales output current for small or larger brakes & clutches.

            Control Output Current via –

            • Knob (Potentiometer)
            • 0-10 Volt Signal – from computer or PLC
            • Follower Arm Potentiometer??F-12-6
            • Ultrasonic Sensor??U-B.

            The Placid Ind.?follower?arm or?ultrasonic sensor?connects to the supply for constant tension unwinding / rewinding applications.

            More information >>

             

             

             
            PST   24 Volts,??2, 3, 4 Amp versions
            For large brakes & clutches or multilple smaller ones.

            Control Output Current via –

            • Knob (Potentiometer)
            • 0-5 volt,??0-10 volt??or??4-20mA DC Signal

            More information >>

             

             

             
            PSH   30 Volts,??2, 3, 5 Amp versions
            For large brakes & clutches or multilple smaller ones.

            Control Output Current or Output Voltage via –??Knob (Potentiometer)

            More information >>

            MODEL  
            F-12-6
            (Aluminum Case)
            FM-4-2
            (Miniature)
             
            Resistance 500 ohm  
            Electrical Angle 65 degrees  
            Mechanical Angle 360 degrees??(No stops)  
            Drag Torque 4 oz.-in. 1 oz.-in.  
            Overhung Load 20 lbs. 2 lbs.  
            Download set-up
            instructions
             

            Ultrasonic Sensor U-B Specifications

            Power Input . . . . .??15-30 VDC, 35 milliamps max.
            Powered by Placid Ind. power supply.
            Range?. . . . . . . .??3.9 – 39.3 inches (100-1000 mm)
            Output??. . . . . . .??0 to 10 volts D.C., 20 mAmps max.
            Push button adjustable endpoints
            Resolution??. . . . .??0.012 inches (<0.3 mm)
            Repeatability?. . . .??0.02 inches (<0.5 mm)
            Temperature?. . . . .??14 to 140°F (-10 to +60°C)
            Protection class??. .??IP67 (Sealed plastic case)
              Download detailed set-up directions.
            FOR BRAKE
            OR CLUTCH
            MODEL
            CUSTOMER SHAFT FLEXIBLE COUPLING DIMENSIONS
            Diameter Type Part Number Diameter Length Shaft Gap Type
            min. max.
            B5Z 3/16 clamp J16-3-2 0.63 0.80 0.02 0.40 Beam
            B1, C2 J19-3-3 0.75 0.90
            B2 1/4 J22-4-4 0.88 1.06 0.46
            C5 5/16 J25-5-5 1.00 1.25 0.65
            B6 3/8 J28-6-6 1.13 1.50 0.91
            B15, C15 3/8 2 flats at
            90 degrees
            J33-F37-F37 1.31 1.89 0.71 0.78 Oldham
            B35, C35 1/2 J41-F50-F50 1.63 2.00 0.60 0.66
            B60 3/4 3/16 keyway J50-C75-K75 1.97 2.35 0.72 0.79
            2 flats at
            90 degrees
            J50-C75-F75
            C70 3/4 3/16 keyway J50-K75-K75 1.97 2.35 0.72 0.79
            2 flats at
            90 degrees
            J50-K75-F75
            B115, B150
            B220,C130
            3/4 3/16 keyway J57-K75-K75 2.25 3.07 0.83 0.91
            7/8 J57-K75-K87
            KB & POB (large brakes) &
            KC & POC (large clutches)
            View large series of couplings.
            Model Rated Torque Drawings? Photographs

            Data Sheets

            ?

            Solid Shaft Hollow Shaft
            1 Side 2 Sides
            B5ZD 1??oz.-in. Options B5ZD-2 / B5Z-2
            drawing
            Not
            Available
            B5Z,??B5ZD photo B5ZD data sheet
            B5Z 5??oz.-in. B5Z data sheet
            B1 16??oz.-in. Options B1-2 drawing B1 photo B1 data sheet
            B2 40??oz.-in. B2-1 drawing B2-2 drawing B2 photo B2 data sheet
            B6 6??lb.-in. B6-1 drawing B6-2 drawing B6 photo B6 data sheet
            B15 15??lb.-in. B15-1 drawing B15-2 drawing B15-H drawing B15 photo B15 data sheet
            B35 35??lb.-in. B35-1 drawing B35-2 drawing B35-H drawing B35 photo B35 data sheet
            B60 60??lb.-in. B60-1F drawing
            B60-1K drawing
            Not
            Available
            B60-H drawing B60 photo B60 data sheet
            B115 115??lb.-in. B115-1 drawing B115-H drawing B115 photo B115 data sheet
            B150 150??lb.-in. B150-1 drawing B150-H drawing B150 photo B150 data sheet
            B220 220??lb.-in. B220-1 drawing B220-H drawing B220 photo B220 data sheet
            KB-2.5 15??lb.-ft. KB-2.5 drawing Not Available KB-2.5 photo KB-2.5 data sheet
            KB-5 38??lb.-ft. KB-5 drawing KB-5 photo KB-5 data sheet
            POB-100F? 70??lb.-ft. ??POB-100F – no fan POB-100F photo POB-100F
            data sheet
            with 110v fan POB-100F photo
            with fan
            with 220v fan
            POB-200F 130??lb.-ft. POB-200F – no fan POB-200F photo POB-200F
            data sheet
            with 110v fan PFB-200F photo
            with fan
            with 220v fan
            POB-400F 300??lb.-ft. POB-400F – no fan POB-400F photo POB-400F
            data sheet
            with 110v fan PFB-400F photo
            with fan
            with 220v fan
            PLB-50 30??lb.-ft. Not Available PLB-50 drawing PLB-50 photo PLB-50 data sheet
            PLB-100 70??lb.-ft. PLB-100 drawing PLB-100 photo PLB-100 data sheet
            PLB-200 140??lb.-ft. PLB-200 drawing PLB-200 photo PLB-200 data sheet

             

             

            Magnetic Particle Clutches
            Model Rated Torque Drawings
            Photographs
            Data Sheets
            ?
            C2 2??lb.-in. C2 drawing C2 photo C2 data sheet
            C5 5?lb.-in. C5 drawing C5 photo C5 data sheet
            CC14 14?lb.-in. CC14-HM drawing CC14-HM photo CC14 data sheet
            C15 15?lb.-in. C15 drawing C15 photo C15 data sheet
            C35 35?lb.-in. C35 drawing C35 photo C35 data sheet
            C70 70?lb.-in. C70 drawing C70 photo C70 data sheet
            C130 130?lb.-in. C130 drawing C130 photo C130 data sheet
            KC-2.5 15??lb.-ft. KC-2.5 drawing KC-2.5 photo KC-2.5 data sheet
            PHC-50 30??lb.-ft. PHC-50 drawing PHC-50 photo PHC-50 data sheet
            KC-5 38??lb.-ft. KC-5 drawing KC-5 photo KC-5 data sheet
            PHC-100 65??lb.-ft. PHC-100 drawing PHC-100 photo PHC-100 data sheet
            POC-100F 75??lb.-ft. POC-100F drawing POC-100F photo POC-100F data sheet
            POC-200F 130??lb.-ft. POC-200F drawing POC-200F photo POC-200F data sheet
            POC-400F 300??lb.-ft. POC-400F drawing POC-400F photo POC-400F data sheet
            Hysteresis Brakes
            Model Rated
            Torque

            (oz.-in.)

            Drawings? Photographs

            Data Sheets

            ?

             
            Solid Shaft  
            1 Side 2 Sides 1 Side  
            H3 2.6 H3-1 drawing H3-2 drawing H3-3 drawing H3 photo H3 data sheet  
            H11 11 H11-1 drawing H11-2 drawing H11-3 drawing H11 photo H11 data sheet  
            H35 35 H35-1 drawing H35-2 drawing H35-3 drawing H35 photo H35 data sheet  
            H85 85 H85-1 drawing H85-2 drawing H85-3 drawing H85 photo H85 data sheet  
            H140 140 H140-1 drawing H140-2 drawing H140-3 drawing H140 photo H140 data sheet  
            H250 250 H250-1 drawing H250-2 drawing H250-3 drawing H250 photo H250 data sheet  

            Models H11 thru H250 have the Placid Industries?Cog-Buster?which keeps slip torque smooth.
             

            Power Supplies
            Model Style Drawings
            Photographs
            Instructions
            ?
            PS Open PS & PS-M
            drawing
            PS photo PS instructions
            PS-M Open,
            with ammeter
            PS-M photo PS-M instructions
            PS-MC Enclosed PS-MC
            drawing
            PS-MC photo PS-MC instructions
            PST Enclosed,
            aluminum case
            PST
            drawing
            PST photo PST instructions
            PSH Enclosed,
            bench-top
            PSH photo PSH instructions

             

             

            ?
            网上快速赚钱的方法
            <progress id="5d6tc"></progress><dl id="5d6tc"></dl>

            <em id="5d6tc"></em>
            <em id="5d6tc"><tr id="5d6tc"></tr></em>

                <div id="5d6tc"></div>

                  <div id="5d6tc"><ol id="5d6tc"><mark id="5d6tc"></mark></ol></div>
                    <div id="5d6tc"></div>

                      <progress id="5d6tc"></progress><dl id="5d6tc"></dl>

                      <em id="5d6tc"></em>
                      <em id="5d6tc"><tr id="5d6tc"></tr></em>

                          <div id="5d6tc"></div>

                            <div id="5d6tc"><ol id="5d6tc"><mark id="5d6tc"></mark></ol></div>
                              <div id="5d6tc"></div>